Technical Innovations

Manufacturer of Home-Dome and Pro-Dome Observatories

  Home | Contact Us | Company Profile | Products | Customer Comments | FAQs | Prices | Assembly | Product Photos | Assembly Photos | Trouble Shooting | Links | Downloads
 
 
 

6 Foot Domes

Please choose from the 6 foot dome products listed below.
Purchase of the domes themselves are made directly with TI with payment of a 25% deposit.
 



Ordering & Terms
Pre-Assembly
Packing & Crating
Shipping


 SIX FOOT DOME PRODUCTS - CLICK ON THUMBNAIL FOR FULL SIZE PHOTO
Product Name: Six foot dome "short"
Part Number: HD6
Price (US$): 3,750.00
Product Description: The HD6, six foot dome "short", is designed for mounting upon an existing structure. The dome comes with a 9" high "Base Ring" which contains the rotation system. The complete dome is 3'10" high on the inside and weighs only 110 pounds assembled. The outside diameter of the Base Ring is 72" and the 3" mounting flange turns to the inside. The shutter is a full 30" wide and opens 12" past the zenith  
learn more

Product Name: Six foot dome "tall"
Part Number: PD6
Price (US$): 5,395.00
Product Description: The PD6, six foot dome "tall", is designed for a stand-alone installation, most often on a concrete pad or deck. The dome comes with a 45" high wall with reverse flange, with a built in 19" wide door. The complete dome is 6'10" high at the zenith on the inside. The outside diameter of the wall is 72" and the 3" mounting flange turns to the inside. The shutter is a full 30" wide and opens 12" past the zenith   
learn more

Product Name: PD6 Computer Cubbie
Part Number: CC6
Price (US$): 695.00
Product Description: Computer cubbie can be molded into any (or all) of the three 45" high wall sections making up the PD6 observatory. Increases dome floor area by providing a recess in dome wall for working with your computer and or observatory accessories. The cubbie size is 30" wide by 16"deep by 40" high. 
learn more
Product Name: Rectangular Skirt
Part Number: RS6
Price (US$): 795.00
Product Description: Four piece fiberglass skirt to make the transition between the circular observatory base ring and a flat or sloping roof or building edge. The horizontal flange of the RS6 fastens to the underside of the base ring mounting flange, while a vertical flange attaches to your structure. The skirt slopes downward 4 inches to the 6''6.75" square wall. The skirt can completely support the 110 pound HD6 without additional structural support.  
learn more
Product Name: PD6 Computer Cubbie Add-on
Part Number: CC6A
Price (US$): 725.00
Product Description: When initially ordered as a part of the PD6, the cubbie is molded into the wall section as a single piece. The Computer cubbie add-on allows the observatory owner to add the cubbie after the fact. A hole is cut in the wall section and the Cubbie Add-on is pushed through from the inside. There are flanges completely around the cubbie for bolting to the wall and weather sealing with the included silicone sealer.
learn more